Back to top

Cookie consent

This website uses cookies to personalise content and to analyse our traffic.

Necessary - Necessary cookies are needed to enable websites basic functions. The website cannot function properly without these cookies. (These are always active)
Marketing - Marketing cookies are used to track visitors across websites. They are mainly used to follow how efficient different ads are - in practice we use these to analyze if internet operators XYZ are useful to us.

You can learn about cookies on our Privacy Policy page page. You can delete and (via deleting and revisiting) change your settings via your browsers functions.

Store in Turku, Finland: Yliopistonkatu 6. Open Mon, Wed, Fri 14-18 and Sat 10-15. More info here.
Templar's Gear

Templar's Gear Cataphract Integrated Ballistic Vest with ROC Attachment, M05 (CIBV)

  • Note! In the picture vest has PGD plates inside that are not included.
  • Note! In the picture vest has PGD plates inside that are not included.
  • Note! In the picture vest has PGD plates inside that are not included.
  • Note! In the picture vest has PGD plates inside that are not included.
  • Templar's Gear Cataphract Integrated Ballistic Vest with ROC Attachment, M05 (CIBV)
  • Templar's Gear Cataphract Integrated Ballistic Vest with ROC Attachment, M05 (CIBV)
  • Templar's Gear Cataphract Integrated Ballistic Vest with ROC Attachment, M05 (CIBV)
  • Templar's Gear Cataphract Integrated Ballistic Vest with ROC Attachment, M05 (CIBV)
  • Templar's Gear Cataphract Integrated Ballistic Vest with ROC Attachment, M05 (CIBV)
Note! In the picture vest has PGD plates inside that are not included.
Warranty 24 mos.

2 758,71 kr

(incl. VAT 24%)

Check shipping methods

Shipping

Delivery on
These are estimated delivery dates. Please take into account that orders are normally not transported on holidays and weekends. The order can be collected during the opening hours of your nearest pickup point. You can track your order with the tracking number found in the order confirmation email.
Color:
M05
Warranty:
24 mos. (2 yr.)
IRR Treatment:
Full treatment
Product out of stock? Give us your email and we will notify you once it is available again.

The information you submit will be used to send the availability notification. We will process your data in accordance with our Privacy Policy.

It’s been a long time coming – the M05

Tradesoft is proud to present the fruits of co-operation with Templar’s Gear: tactical combat gear with the Finnish M05 camouflage! The aim of this co-operation is to fill a torso-sized hole in the Finnish gear market: before this, it was not possible to have a full combat gear set available with the domestic M05 pattern.

We had contemplated on acquiring M05 combat gear before, but had not found a suitable manufacturer before Templar’s Gear. The actual idea of this project was born in the fall of 2017 when the first Templar’s Gear products landed at our headquarters. After finding a suitable friend and partner in Poland, it was obvious that we had to present this gift to the airsoft/reserve forces/military/defence forces/SRA shooting communities and everyone interested in the Finnish camouflage pattern.


Templar's Gear's Cataphract ("Kata" among friends) is a scalable ballistic vest system that can be used as a shrapnel vest, as a lightweight bullet vest that provides the level of protection of the plate oarrier, or to use soft and hard armour at the same time. It is the system for adapting to different threat levels and mission parameters: when you have to go fast and the threat is only shrapnel, put only soft plates inside. If the threat is mainly bullets, you can insert just the hard plates in the vest. If the situation gets really bad, put both!

The vest is really light and, compared to previous generations, also smarter in ergonomics. The vest uses soft protective plates of its own cut (the same cut as its little brother Koursores) and 25 x 30 cm or SAPI-style hard plates, which we have available from Protection Group Danmark. Compared to the BALCS of the early 2000s, this cut is more ergonomic and modular, as the "wings" of the protective plates are shorter and the position/angle of the side ballistic plates can be slightly adjusted using the cummerbund. The maximum achievable protection is therefore NIJ IIIA + IV, which offers excellent protection against shrapnel and bullets from rifle calibers. You can find more detailed information about the protection surfaces in a separate table!

Features:

  • Unbelievably light: only 990 g when empty!
  • Made from Templar's own Baucent laminate, 500D Foxdura as the basis
  • Quick donning and doffing with ROC system. Two D-rings included with which the shoulder buckles can be replaced if desired.
  • Clever design: the cummerbund attachment points are on top of the plate bags, so the vest doesn't actually hang or bag, even if there are no hard plates inside.
  • Large protective surface area, still good mobility without unnecessary weight. Learn more about the protection surface in a separate table!
  • Ability to use front panels. The front panel mount is compatible with practically all SwiftClip mounted chest rigs and panels! The panel fixing buckles are quality products from the South Korean company Woojin. The front panel's mounting base has loop velcro along the entire length of the upper part, so the panels won't hang even in heavy loads. CPC panels fit!
  • Compatible with Templar's Flat Packs and back panels either with the adapters that come with the smaller Flat Pack, or with these separately sold adapters.
  • Possibility to attach different danglers, i.e. fanny bag style pouches to hang below the front plate bag either to the horizontal PALS, to the velcro under the front panel or to the velcro of the plate bags.
  • Loads of openable loops for organizing cables and hydration bladder tubes and a carry/evacuation handle at the back.
  • In the front plate bag, from top to bottom, the following PALS/MOLLE matrices: 4 x 3 and 6 x 3.5. At the bottom, horizontally, a 1 x 3.5 matrix and next to the front panel on both sides, 2.5 and 3.5 rows high columns. At the bottom you can attach Templar's own dangler, for example, and on the sides, for example, a radio pocket or poouches for hard side protection plates.
  • In the back plate bag, a 6 x 6 PALS matrix with a 4-column row above and 3.5 and 3-row high columns under the cummerbund. In addition, a 1 x 4.5 PALS matrix in the horizontal plane at the bottom
  • Cummerbund has PALS/MOLLE matrix on the outside for attaching pouches. In all sizes, the height is 3 rows (middle rows are also available), in M size there are 5 columns, in L size 6 and in XL size 7.
  • Thanks to the laser cutting, all PALS rows are "double", i.e. the spaces between the rows also act as loops, and the height of the pouch can be adjusted in 25 mm increments instead of the traditional 50 mm.
  • 16 x 5.5 cm loop velcro matrix in the front for IFF, morale, etc. patches. On both sides of this there are places for, for example, PTT clips or wires.
  • Detachable neck-shoulder protector that takes in the soft ballistic plates of its own cut, we have these made by Protection Group Danmark!
  • A total of nine ballistic plate slots: in the front and back plate bags there are places for soft and hard plates, in the cummerbund on both sides fort soft ones, and in the neck-shoulder protection, two shoulder protectors and a neck protector. Find the necessary soft plates here! There is also a table with links at the end of the product description.
  • The larger body-facing soft armour section of the plate bags uses plates specially tailored for the Cataphract and Koursores vests, available from Protection Group Danmark! Soft 25 x 30 cm or SAPI sheets and the like also fit inside, but they can wander a little and they do not achieve the full protection surface.
  • The smaller section on top of the previous ones uses 25 x 30 cm or SAPI cut boards. From SAPI/ESAPI plates, at least S and M size plates go, possibly also at least thinner L size ICW plates. Please note that an ICW plate is sufficient as a hard plate, if the vest has soft armour inside at the same time! Here is an excellent alternative for a hard ICW plate.
  • Compatible with CPC series. In principle, there is nothing stopping you from combining CPC and Cataphract front/rear plate bags if you see it as the best solution for you.

Rapid Open Connectors – Divide And Control

The indisputable advantage of the ROC system is a certain kind of positive continuity: size adjustments do not change on their own, as ROC buckles always close the same regardles of hurry or magazines attached to front panel. The traditional velcro closure has a slightly different angle and circumference each time and when opening the front flap, pouches and magazines are often in the way. However, if necessary, adjustments can be made quickly using the opening on the back of the vest - even with the back panel in place! Removing the velcro also makes the vest thinner in the front, so even with the ballistic plates, the vest is not as thick as a more traditional plate carrier and the profile of a soldier in a laid up position is smaller.

The undeniable advantage of the ROC system is also speed, especially when removing the vest. If necessary, for example when getting into water or patching up a wounded fighter, the vest comes off the user in seconds. By opening all the buckles, the front plate bag completely detaches from the back plate bag, so the vests do not accidentally become a vague spaghetti around the wearer, but the thing breaks down into easily manageable small units.

Panel On – Panel Off

With front and back panels it is easy to change the nature of the vest on the fly. The back panel can hold different "assault panel" configurations and the front panels can have different pouches for different magazines. The smartest way to attach the pouches on the back is to attach them to the panel, because then the the back can be emptied quickly, for example for a backpack.

Etupaneelit kiinnittyvät Cataphractiin velcrolla ja Fastex-klipsuilla. Käyttökokemustemme mukaan paneelin saa kiinni ja irti alta minuutissa pienen sisäänajovaiheen jälkeen. Etupaneelipaikka on yhteensopiva useimpien SwiftClip-kiinnitteisten chestrigien ja etupaneelien kanssa!

The front panels are attached to the Cataphract with velcro and Fastex buckles. The back panels are attached with adapters and attachment hooks that are threaded into the PALS loops. After the adapters have been installed, there is no need to unthread and rethread the PALS, but the zippers are used for fast and convenient method of donning and doffing back panels. According to our user experience, the back panel can be attached and detached from the carrier in less than a minute after a short break-in phase. The front panel slot is compatible with practically all SwiftClip attaching chest rigs and front panels!

Note! Panels and back panel adapters are sold separately!

Plate Bags – The Bearable Lightness of Being

Levytaskut ovat viimeisen päälle suunnitellut: laserleikkausten reunat on pyöristetty, jotta rasitus ei pääse pistemäisesti kuormittumaan yhteen pisteeseen. Lisäksi levytaskut (myös cummerbundissa olevat) on kehon puolelta varustettu 3D-kuvioidulla Gambeson-laminaatilla, jotta ilma pääsee kiertämään. Tämä on erityisen mukavaa tällaisessa liivissä, jossa hengittämättömät suojalevyt peittävät hyvin suuren osan torsosta! Etu- ja takalevytaskujen sivuilla olevat PALS-kujastot korvaavat hienosti Templarin perinteisen kaksiosaisen cummerbundin, jota tässä liivissä ei ole cummerbundin suojalevytaskujen takia.

The plate bags are designed to last: the edges of the laser cuts are rounded so that the stress does not get concentrated in one point. In addition, the plate bags (also in the cummerbund) are equipped with 3D-patterned Gambeson laminate on the body side to allow air to circulate. This is especially nice in a vest like this, where the non-breathable protective panels cover a very large part of the torso! The PALS matrices on the sides of the front and back plate pockets are a nice replacement for Templar's traditional two-piece cummerbund, which this vest does not have due to the cummerbund ballistic plate sections.

Here is the table for ballistic plate slots and links to corresponding plates. Checkout the readymade bundles too!

Slot:Plate:
Front- and back plate bags, soft armour
Front- and back plates set
Front- and back plate bags, hard armour25X30cm, SAPI S and M
Cummerbund (remember to select the correct size for the plates!)
Cummerbund-plates set*
Neck/shoulder protector
Neck-shoulder plates set


* Smaller size plates fit into the bigger size, but may wander a little.

Materials & manufacturing

The Templar’s Gear M05 products are manufactured from the Finnish Foxa 500 denier Foxdura fabric by using laser cut technology, which enabled us to reduce the weight of the gear without compromising reliability. The material meets the Finnish Defence Forces' requirements for IRR protection and the other materials are also IRR treated. This means that the products can be safely used even in situations where you need to be hidden in the IR spectrum!

The laser cut PALS webbings are also extremely durable, because they don’t have stitches which are prone to wear and tear. Special attention has been paid to quality control in Templar’s pouches and gear, because a significant portion of the company’s customers are officials, whose safety and well-being might depend on the gear.

Conscription in Finnish military

Well, since someone’s going to ask anyway, let’s answer: we do not know if this gear can be used when you are in general conscription. If you want to be polite, you can ask your officer, if it’s okay to use your own gear. However, it’s usually easier to apologize later than to get permission. If necessary, we recommend you demonstrate the features of the gear, for example in the IR spectrum, where you can clearly prove that this gear has been made for military use and is not some Chinese knock-off.

Cooperation - Yhteistyö - Współpraca

Templar's Gear products are delivered to us straight from the factory in Poland. This means that our product selection is updated to the latest and greatest generation almost in real time as replenishments are ordered. Thanks to the close cooperation and our frequent orders, we also have a chance to forward feedback and new ideas to the respective designers. If you as a user have any ideas for product development, we are happy to share them with Templar's Gear.

Extended two-year warranty

Templar’s Gear products are granted a two-year warranty. In more concrete manner this means for example products sold on this spring will have warranty for two action packed seasons of airsoft, shooting or whatever you do with them.

Warranty covers all problems that should arise from defective materials or poor craftsmanship. Carelessness or misuse voids the warranty.

Templar's Gear

Templar's Gear

Templar’s Gear represents the renaissance of European military gear manufacturers that began in the 21st century. American manufacturers dominated the tactical gear market for a long time, but the Old World was not yet ready to throw in the towel. In this continuum, Templar’s Gear represents the leading edge of high-quality, modern and well-designed gear. The defining characteristic of the company is that their products are manufactured using laser cutting and 500 denier Cordura, which makes the products a lot lighter without compromising reliability. Special attention has been paid to quality control in Templar’s pouches and gear, because a significant portion of the company’s customers are officials, whose safety and well-being might depend on the gear. The materials used by Templar’s Gear are IRR protected, so the user won’t glow in the night vision devices like a Ukrainian firefighter.

Cooperation - Yhteistyö - Współpraca

Templar's Gear products are delivered to us straight from the factory in Poland. This means that our product selection is updated to the latest and greatest generation almost in real time as replenishments are ordered. Thanks to the close cooperation and our frequent orders, we also have a chance to forward feedback and new ideas to the respective designers. If you as a user have any ideas for product development, we are happy to share them with Templar's Gear.

Extended two-year warranty

Templar’s Gear products are granted a two-year warranty. In more concrete manner this means that for example products sold this spring will have warranty for two action packed seasons of airsoft, shooting or whatever you decide to do with them.

The warranty covers all problems that might arise from defective materials or poor craftsmanship. Carelessness or misuse voids the warranty.

Sizing:

There is some play with the measurements because the cummerbund’s elastic part stretches. The plates used in the measurements are about 0.49 cm and 2 cm thick. Plates that are of different thickness will affect the fit. We recommend using plates, with training plates and/or tent mattress if estimated threat level is only not looking fashionable. If your waist is wider than your chest, then we recommend using the waist measure.

Front plate bag, without shoulder straps:

Length Width at waist
Width at top
39 cm 44 cm26 cm

Back plate bag, without shoulder straps:

Length Width at waist
Width at top
39 cm 40 cm30 cm

Cummerbund halves length:

Size Maximum length:
Medium 34 cm
Large38 cm
X-Large42 cm

Therefore increasing the size lengthens the circumference by 8 cm, 10 cm if one takes the elastic section into account. Here is the same in a table format:

SizeWithout plates:
With soft armour:
With soft and hard armour:
Medium100-125 cm90-120 cm80-115 cm
Large110-135 cm100-130 cm90-125 cm
X-Large120-145 cm110-140 cm100-135 cm

Leikkaus, ergonomia ja suojapinta-ala

Ballistisen levyn valinta on käytännössä aina hyöty-kustannuslaskentaa muutaman tekijän välillä: paino vs. suojaustaso vs. pinta-ala ja paino eli liikkuvuus. Samaan kategoriaan voisi myös mainita levyn paksuuden, mutta käytännössä vaihteluväli on hyvin pieni, joten tässä taulukossa sitä ei ole huomioitu. Lisäksi kaikkien valmistajien levyt eivät ole aidosti reunasta reunaan suojattuja, eli eri valmistajien samankokoisissa levyissä saattaa olla eroja todellisessa suojapinta-alassa. Protection Group Danmarkin kaikki levyt ovat aidosti reunasta reunaan suojattuja.

Taulukossa ei ole myöskään huomioitu levyn kaarteiden määrää: lähtökohtaisesti multicurved on aina mukavampi kuin singlecurved, mutta tämä on enemmän ergonomiakysymys. Tässä taulukossa ei ole myöskään huomioitu kovien levyjen kokovaihtoehtoja (25x30cm; SAPI S, M, L, XL), sillä ne skaalautuvat toisiinsa nähden saumattomasti.

Suosittelemme ensin valitsemaan suojaustason (ks. ylempi taulukko), jonka vähintään tarvitset ja sitten valitsemaan tämän taulukon avulla omaan käyttötarpeeseesi sopivimman pinta-alan, joka tarjoaa sen verran liikkuvuutta kuin käyttöympäristösi vaatii. Lopuksi levyjen ergonomia, paino ja paksuus määräytyy pitkälti lompakkosi mukaan.

LeikkausSuojapinta-alaLiikkuvuus
Swimmer/ShooterSAPIa hiukan pienempi, korkeintaan NIJ IV.Paras
SAPITärkeimmät sisäelimet, korkeintaan NIJ IV.Hyvä
Koursores/Cataphract
Pehmeät suojat, vain keho
Keskivartalo, korkeintaan NIJ IIIA.Hyvähkö
Koursores/Cataphract
Pehmeät suojat
Keskivartalo, niska ja hartiat, korkeintaan NIJ IIIA.Kohtalainen
Cataphract
Koko setti

Tärkeimmät sisäelimet, korkeintaan NIJ IV + keskivartalo, niska ja hartiat, korkeintaan NIJ IIIA.

Heikoin


It’s been a long time coming – the M05

Tradesoft is proud to present the fruits of co-operation with Templar’s Gear: tactical combat gear with the Finnish M05 camouflage! The aim of this co-operation is to fill a torso-sized hole in the Finnish gear market: before this, it was not possible to have a full combat gear set available with the domestic M05 pattern.

We had contemplated on acquiring M05 combat gear before, but had not found a suitable manufacturer before Templar’s Gear. The actual idea of this project was born in the fall of 2017 when the first Templar’s Gear products landed at our headquarters. After finding a suitable friend and partner in Poland, it was obvious that we had to present this gift to the airsoft/reserve forces/military/defence forces/SRA shooting communities and everyone interested in the Finnish camouflage pattern.


Templar's Gear's Cataphract ("Kata" among friends) is a scalable ballistic vest system that can be used as a shrapnel vest, as a lightweight bullet vest that provides the level of protection of the plate oarrier, or to use soft and hard armour at the same time. It is the system for adapting to different threat levels and mission parameters: when you have to go fast and the threat is only shrapnel, put only soft plates inside. If the threat is mainly bullets, you can insert just the hard plates in the vest. If the situation gets really bad, put both!

The vest is really light and, compared to previous generations, also smarter in ergonomics. The vest uses soft protective plates of its own cut (the same cut as its little brother Koursores) and 25 x 30 cm or SAPI-style hard plates, which we have available from Protection Group Danmark. Compared to the BALCS of the early 2000s, this cut is more ergonomic and modular, as the "wings" of the protective plates are shorter and the position/angle of the side ballistic plates can be slightly adjusted using the cummerbund. The maximum achievable protection is therefore NIJ IIIA + IV, which offers excellent protection against shrapnel and bullets from rifle calibers. You can find more detailed information about the protection surfaces in a separate table!

Features:

  • Unbelievably light: only 990 g when empty!
  • Made from Templar's own Baucent laminate, 500D Foxdura as the basis
  • Quick donning and doffing with ROC system. Two D-rings included with which the shoulder buckles can be replaced if desired.
  • Clever design: the cummerbund attachment points are on top of the plate bags, so the vest doesn't actually hang or bag, even if there are no hard plates inside.
  • Large protective surface area, still good mobility without unnecessary weight. Learn more about the protection surface in a separate table!
  • Ability to use front panels. The front panel mount is compatible with practically all SwiftClip mounted chest rigs and panels! The panel fixing buckles are quality products from the South Korean company Woojin. The front panel's mounting base has loop velcro along the entire length of the upper part, so the panels won't hang even in heavy loads. CPC panels fit!
  • Compatible with Templar's Flat Packs and back panels either with the adapters that come with the smaller Flat Pack, or with these separately sold adapters.
  • Possibility to attach different danglers, i.e. fanny bag style pouches to hang below the front plate bag either to the horizontal PALS, to the velcro under the front panel or to the velcro of the plate bags.
  • Loads of openable loops for organizing cables and hydration bladder tubes and a carry/evacuation handle at the back.
  • In the front plate bag, from top to bottom, the following PALS/MOLLE matrices: 4 x 3 and 6 x 3.5. At the bottom, horizontally, a 1 x 3.5 matrix and next to the front panel on both sides, 2.5 and 3.5 rows high columns. At the bottom you can attach Templar's own dangler, for example, and on the sides, for example, a radio pocket or poouches for hard side protection plates.
  • In the back plate bag, a 6 x 6 PALS matrix with a 4-column row above and 3.5 and 3-row high columns under the cummerbund. In addition, a 1 x 4.5 PALS matrix in the horizontal plane at the bottom
  • Cummerbund has PALS/MOLLE matrix on the outside for attaching pouches. In all sizes, the height is 3 rows (middle rows are also available), in M size there are 5 columns, in L size 6 and in XL size 7.
  • Thanks to the laser cutting, all PALS rows are "double", i.e. the spaces between the rows also act as loops, and the height of the pouch can be adjusted in 25 mm increments instead of the traditional 50 mm.
  • 16 x 5.5 cm loop velcro matrix in the front for IFF, morale, etc. patches. On both sides of this there are places for, for example, PTT clips or wires.
  • Detachable neck-shoulder protector that takes in the soft ballistic plates of its own cut, we have these made by Protection Group Danmark!
  • A total of nine ballistic plate slots: in the front and back plate bags there are places for soft and hard plates, in the cummerbund on both sides fort soft ones, and in the neck-shoulder protection, two shoulder protectors and a neck protector. Find the necessary soft plates here! There is also a table with links at the end of the product description.
  • The larger body-facing soft armour section of the plate bags uses plates specially tailored for the Cataphract and Koursores vests, available from Protection Group Danmark! Soft 25 x 30 cm or SAPI sheets and the like also fit inside, but they can wander a little and they do not achieve the full protection surface.
  • The smaller section on top of the previous ones uses 25 x 30 cm or SAPI cut boards. From SAPI/ESAPI plates, at least S and M size plates go, possibly also at least thinner L size ICW plates. Please note that an ICW plate is sufficient as a hard plate, if the vest has soft armour inside at the same time! Here is an excellent alternative for a hard ICW plate.
  • Compatible with CPC series. In principle, there is nothing stopping you from combining CPC and Cataphract front/rear plate bags if you see it as the best solution for you.

Rapid Open Connectors – Divide And Control

The indisputable advantage of the ROC system is a certain kind of positive continuity: size adjustments do not change on their own, as ROC buckles always close the same regardles of hurry or magazines attached to front panel. The traditional velcro closure has a slightly different angle and circumference each time and when opening the front flap, pouches and magazines are often in the way. However, if necessary, adjustments can be made quickly using the opening on the back of the vest - even with the back panel in place! Removing the velcro also makes the vest thinner in the front, so even with the ballistic plates, the vest is not as thick as a more traditional plate carrier and the profile of a soldier in a laid up position is smaller.

The undeniable advantage of the ROC system is also speed, especially when removing the vest. If necessary, for example when getting into water or patching up a wounded fighter, the vest comes off the user in seconds. By opening all the buckles, the front plate bag completely detaches from the back plate bag, so the vests do not accidentally become a vague spaghetti around the wearer, but the thing breaks down into easily manageable small units.

Panel On – Panel Off

With front and back panels it is easy to change the nature of the vest on the fly. The back panel can hold different "assault panel" configurations and the front panels can have different pouches for different magazines. The smartest way to attach the pouches on the back is to attach them to the panel, because then the the back can be emptied quickly, for example for a backpack.

Etupaneelit kiinnittyvät Cataphractiin velcrolla ja Fastex-klipsuilla. Käyttökokemustemme mukaan paneelin saa kiinni ja irti alta minuutissa pienen sisäänajovaiheen jälkeen. Etupaneelipaikka on yhteensopiva useimpien SwiftClip-kiinnitteisten chestrigien ja etupaneelien kanssa!

The front panels are attached to the Cataphract with velcro and Fastex buckles. The back panels are attached with adapters and attachment hooks that are threaded into the PALS loops. After the adapters have been installed, there is no need to unthread and rethread the PALS, but the zippers are used for fast and convenient method of donning and doffing back panels. According to our user experience, the back panel can be attached and detached from the carrier in less than a minute after a short break-in phase. The front panel slot is compatible with practically all SwiftClip attaching chest rigs and front panels!

Note! Panels and back panel adapters are sold separately!

Plate Bags – The Bearable Lightness of Being

Levytaskut ovat viimeisen päälle suunnitellut: laserleikkausten reunat on pyöristetty, jotta rasitus ei pääse pistemäisesti kuormittumaan yhteen pisteeseen. Lisäksi levytaskut (myös cummerbundissa olevat) on kehon puolelta varustettu 3D-kuvioidulla Gambeson-laminaatilla, jotta ilma pääsee kiertämään. Tämä on erityisen mukavaa tällaisessa liivissä, jossa hengittämättömät suojalevyt peittävät hyvin suuren osan torsosta! Etu- ja takalevytaskujen sivuilla olevat PALS-kujastot korvaavat hienosti Templarin perinteisen kaksiosaisen cummerbundin, jota tässä liivissä ei ole cummerbundin suojalevytaskujen takia.

The plate bags are designed to last: the edges of the laser cuts are rounded so that the stress does not get concentrated in one point. In addition, the plate bags (also in the cummerbund) are equipped with 3D-patterned Gambeson laminate on the body side to allow air to circulate. This is especially nice in a vest like this, where the non-breathable protective panels cover a very large part of the torso! The PALS matrices on the sides of the front and back plate pockets are a nice replacement for Templar's traditional two-piece cummerbund, which this vest does not have due to the cummerbund ballistic plate sections.

Here is the table for ballistic plate slots and links to corresponding plates. Checkout the readymade bundles too!

Slot:Plate:
Front- and back plate bags, soft armour
Front- and back plates set
Front- and back plate bags, hard armour25X30cm, SAPI S and M
Cummerbund (remember to select the correct size for the plates!)
Cummerbund-plates set*
Neck/shoulder protector
Neck-shoulder plates set


* Smaller size plates fit into the bigger size, but may wander a little.

Materials & manufacturing

The Templar’s Gear M05 products are manufactured from the Finnish Foxa 500 denier Foxdura fabric by using laser cut technology, which enabled us to reduce the weight of the gear without compromising reliability. The material meets the Finnish Defence Forces' requirements for IRR protection and the other materials are also IRR treated. This means that the products can be safely used even in situations where you need to be hidden in the IR spectrum!

The laser cut PALS webbings are also extremely durable, because they don’t have stitches which are prone to wear and tear. Special attention has been paid to quality control in Templar’s pouches and gear, because a significant portion of the company’s customers are officials, whose safety and well-being might depend on the gear.

Conscription in Finnish military

Well, since someone’s going to ask anyway, let’s answer: we do not know if this gear can be used when you are in general conscription. If you want to be polite, you can ask your officer, if it’s okay to use your own gear. However, it’s usually easier to apologize later than to get permission. If necessary, we recommend you demonstrate the features of the gear, for example in the IR spectrum, where you can clearly prove that this gear has been made for military use and is not some Chinese knock-off.

Cooperation - Yhteistyö - Współpraca

Templar's Gear products are delivered to us straight from the factory in Poland. This means that our product selection is updated to the latest and greatest generation almost in real time as replenishments are ordered. Thanks to the close cooperation and our frequent orders, we also have a chance to forward feedback and new ideas to the respective designers. If you as a user have any ideas for product development, we are happy to share them with Templar's Gear.

Extended two-year warranty

Templar’s Gear products are granted a two-year warranty. In more concrete manner this means for example products sold on this spring will have warranty for two action packed seasons of airsoft, shooting or whatever you do with them.

Warranty covers all problems that should arise from defective materials or poor craftsmanship. Carelessness or misuse voids the warranty.

This product does not have any bundle packages yet.

Check out all our product bundles here.

Ask about product: Templar's Gear Cataphract Integrated Ballistic Vest with ROC Attachment, M05 (CIBV)

The information you submit will be used to reply your support request. We will process your data in accordance with our Privacy Policy.

Compatible products

Templar's Gear TPC Comfort Pads for Plate Carriers Gen. 2, M05
319,95 kr

Templar's Gear TPC Comfort Pads for Plate Carriers Gen. 2, M05

Warranty 24 mos.
Protection Group Danmark S-LW-line Multi Ballistic Plate, NIJ III+ (ICW) (1 pc)
3 429,93 kr

Protection Group Danmark S-LW-line Multi Ballistic Plate, NIJ III+ (ICW) (1 pc)

Warranty 84 mos.
Protection Group Danmark Berserker Ballistic Plate, NIJ IV (1 pc)
2 162,07 kr

Protection Group Danmark Berserker Ballistic Plate, NIJ IV (1 pc)

Warranty 84 mos.
Templar's Gear Flat Pack Backpack Back Panel, M05 (CPC and MOLLE/PALS)
894,21 kr

Templar's Gear Flat Pack Backpack Back Panel, M05 (CPC and MOLLE/PALS)

Warranty 24 mos.
Protection Group Danmark Delta Soft Ballistic Plate, NIJ IIIA (1 pc)
894,21 kr

Protection Group Danmark Delta Soft Ballistic Plate, NIJ IIIA (1 pc)

Warranty 84 mos.
Templar's Gear CPC Shingle Panel for Three Rifle Mags Gen. 4, M05
640,64 kr

Templar's Gear CPC Shingle Panel for Three Rifle Mags Gen. 4, M05

Warranty 24 mos.
Templar's Gear CPC PALS Front Panel, M05
319,95 kr

Templar's Gear CPC PALS Front Panel, M05

Warranty 24 mos.
Templar's Gear Ballistic Collar and Shoulder Guard Set Gen. 2, Ranger Green
416,90 kr

Templar's Gear Ballistic Collar and Shoulder Guard Set Gen. 2, Ranger Green

Warranty 24 mos.
Templar's Gear Cataphract Ballistic Collar and Shoulder Set, M05
446,73 kr

Templar's Gear Cataphract Ballistic Collar and Shoulder Set, M05

Warranty 24 mos.
Templar's Gear Training Plate 2.5kg
297,57 kr

Templar's Gear Training Plate 2.5kg

Warranty 24 mos.
Montool SAPI Training Plate Gen. 2, 5kg (Multicurved)
595,89 kr

Montool SAPI Training Plate Gen. 2, 5kg (Multicurved)

Warranty 1 mos.
Montool SAPI Training Plate Gen. 2, 3kg (Multicurved)
484,02 kr

Montool SAPI Training Plate Gen. 2, 3kg (Multicurved)

Warranty 1 mos.

Check these out!

Note! In the picture vest has PGD plates inside that are not included.
2 385,81 kr

Templar's Gear Koursores Soft Armor Vest with ROC Attachment, M05 (KSAV)

Warranty 24 mos.
Note! In this picture the vest is fitted with Protection Group Danmark Delta soft armor plates and Templar's Gear 1.5 kg training plates that are sold separately!
2 609,55 kr

Templar's Gear Cataphract Integrated Ballistic Vest with ROC Attachment, Ranger Green (CIBV)

Warranty 24 mos.
Templar's Gear CPC Plate Carrier with ROC Attachment Gen. 4, M05 (Crusader Plate Carrier)
2 236,65 kr

Templar's Gear CPC Plate Carrier with ROC Attachment Gen. 4, M05 (Crusader Plate Carrier)

Warranty 24 mos.
Note! In pictures the vest is fitted with Protection Group Danmark Delta soft armor plates that are sold separately!
2 236,65 kr

Templar's Gear Koursores Soft Armor Vest with ROC Attachment, Ranger Green (KSAV)

Warranty 24 mos.
Protection Group Danmark MICH Ballistic Helmet with Neck Adjustment, OD
3 877,41 kr

Protection Group Danmark MICH Ballistic Helmet with Neck Adjustment, OD

Warranty 60 mos.
Templar's Gear Cataphract Ballistic Collar and Shoulder Set, M05
446,73 kr

Templar's Gear Cataphract Ballistic Collar and Shoulder Set, M05

Warranty 24 mos.
Templar's Gear Flat Pack H2 Backpack Back Panel with CPC Attachment, M05
1 043,37 kr

Templar's Gear Flat Pack H2 Backpack Back Panel with CPC Attachment, M05

Warranty 24 mos.
Your shopping cart is empty

Terms and conditions

Last updated: 8.8.2023

These terms and conditions only apply to end users as such. Contact us by email regarding B2B terms.

1 Prices

Tradesoft Oy (Business ID 2560587-4) sells products within Finland and the EU, as well as to many non-EU countries. All of the prices in our web shop include Finnish VAT (24 %). The currency is euro (€). We reserve the right to price changes.

Finland and other EU countries
The total of the order can be seen in the shopping cart after the correct shipping and payment method have been chosen. No further costs will be charged by Tradesoft.

Non-EU Countries
Some areas that belong to EU countries (see list) are excluded from EU VAT policy, and will be treated as countries outside the European Union. Orders shipped to non-EU countries will be sent out VAT free. However, you are still responsible for paying the customs duty and VAT in your own country before receiving the order.

2 Shipping and delivery

We use Matkahuolto and Posti, the Finnish postal service, for shipping domestic orders. International orders are shipped with GLS, Posti, Postnord and UPS. The available shipping methods will automatically be listed in your shopping cart depending on the products and the shipping country.

We currently ship within Finland (incl. Åland Islands) and to the following countries:

European Union
Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden

Non-EU countries
Anguilla, Argentina, Armenia, Aruba, Australia, Bahamas, Bangladesh, Belize, Bermuda, Bosnia and Herzegovina, Brazil, Canada, Canary Islands, Chile, Costa Rica, Djibouti, Dominica, Egypt, El Salvador, Eritrea, Fiji, Grenada, Guam, Guyana, Iceland, Japan, Kenya, Liberia, Liechtenstein, Malaysia, Mexico, Monaco, Nepal, New Zealand, Norway, Pakistan, Papua New Guinea, Peru, Philippines, Puerto Rico, Russia, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Sierra Leone, Singapore, Switzerland, Tanzania, Thailand, Turkey, Uganda, United States, Venezuela

Customer is responsible for customs clearance in country of delivery. In addition, customer must ensure that none of the goods are prohibited or require special handling in country of delivery. 

2.1 Delivery time and tracking

All orders placed before 1 pm (Eastern European Time) will be shipped on the same or following business day. The estimated delivery time can be seen on the product page and in your shopping cart after choosing the correct shipping country. If the order contains for example installation services the delivery time may be postponed. If a product is out of stock, we will contact the customer with an updated estimation of the delivery time.

You can track your order by logging in to your account, or by going to the following tracking site. You need your order number and the email address that was given when placing the order to track your order.

2.2 Shipping methods and costs

The available shipping methods are updated automatically when you choose your shipping country. The total shipping costs depend on the products and the total value of your shopping cart. Some shipping methods also qualify for free shipping after a certain total cart value has been reached.

See the available shipping methods below based on country.

FINLAND

In-Store Pickup, Turku

Order can be picked up at our store in Turku, Finland during opening hours.

Matkahuolto Near Parcel (incl. Parcel Point)

Delivery time 1-3 business days. Order can be picked up in Matkahuolto or at the following locations: Matkahuolto Parcel Point, K-market, R-kioski. Parcel point orders exceeding 1 parcel or 30 kg will be sent to a Matkahuolto terminal.

Matkahuolto Home Delivery (ADR service)

Delivery time 1-3 business days. Order contains ADR products and it is delivered to your home on weekdays at the time that has been agreed on with you. ADR handling fee for dangerous goods is included in shipping costs.

Matkahuolto Home Delivery

Delivery time 1-3 business days. Order is delivered to your home on weekdays at the time that has been agreed on with you. You may also request the parcel to be delivered to your door without signature confirmation.

Posti Letter

Delivery time 1-4 business days. Order is delivered to your home as basic letter (2nd class). If the letter will not fit through the letter hole the order will be taken to your nearest post office. You will then receive notice of arrival. No tracking available.

Posti Small Parcel

Delivery time 1-4 business days. Order is delivered to your home. If the parcel will not fit through the letter hole the order will be taken to your nearest post office. You will then receive notice of arrival.

Posti Domestic Parcel and SmartPost Parcel Point

Delivery time 1-4 business days. Order is picked up at post office or SmartPost Parcel Point. You receive a text message for SmartPost orders with a code to pick up the order. Remember to take a credit/debit card with you, if you chose Cash on Delivery.

Posti Domestic Parcel to Military Garrison (READ details!)

Delivery time 1-4 business days. Order is sent to military garrison and delivered to you according to its mode of operation. Enter your military garrison, unit and rank as the company name and include the garrison's address in respective fields.

OTHER COUNTRIES


Posti PickUp Parcel, Sweden
Sweden

Delivery time 3-6 business days. Order is delivered to a pick-up or parcel point. Shipping company may contact you by phone or email. Orders are not delivered to P.O. boxes.

Posti PickUp Parcel, Denmark
Denmark

Delivery time 3-5 business days. Order is delivered to a pick-up or parcel point. Shipping company may contact you by phone or email. Orders are not delivered to P.O. boxes.

Posti Baltic Parcel (Itella)
Estonia, Latvia, Lithuania

Delivery time 2-4 business days. Order is delivered to Itella SmartPost parcel point, nearest post office, or to your home. Shipping company may contact you by phone or email. Orders are not delivered to P.O. boxes.

GLS – Zone A
Denmark, Estonia, Latvia, Lithuania, Sweden

Delivery time 1-4 business days. Order is delivered to your home or to nearest pick-up point. Shipping company may contact you by phone.

GLS – Zone B
Austria, Belgium, Czech Republic, Germany, Italy, the Netherlands, Poland, San Marino, Vatican City State

Delivery time 3-5 business days. Order is delivered to your home or to nearest pick-up point. Shipping company may contact you by phone.

GLS – Zone C
France, Luxembourg, Monaco

Delivery time 3-5 business days. Order is delivered to your home or to nearest pick-up point. Shipping company may contact you by phone.

GLS – Zone D
Ireland, Slovakia

Delivery time 3-7 business days. Order is delivered to your home or to nearest pick-up point. Shipping company may contact you by phone.

GLS – Zone E
Bulgaria, Croatia, Hungary, Portugal, Romania, Slovenia, Spain

Delivery time 3-7 business days. Order is delivered to your home or to nearest pick-up point. Shipping company may contact you by phone.

GLS – Zone F
Greece, Malta

Delivery time 5-8 business days. Order is delivered to your home or to nearest pick-up point. Shipping company may contact you by phone.

GLS – Zone G
Norway, United Kingdom

Delivery time 3-8 business days. Order is delivered to your home or to nearest pick-up point. Shipping company may contact you by phone.

GLS – Zone H
Liechtenstein, Switzerland

Delivery time 4-5 business days. Order is delivered to your home or to nearest pick-up point. Shipping company may contact you by phone.

Posti Parcel Connect – Zone 3
Germany

Delivery time 2-5 business days. Order is delivered to your home or to nearest post office. Shipping company may contact you by phone or email. Orders are not delivered to P.O. boxes.

Posti Parcel Connect – Zone 7
Austria, Belgium, Czech Republic, the Netherlands, Poland

Delivery time 4-6 business days. Order is delivered to your home or to nearest post office. Shipping company may contact you by phone or email. Orders are not delivered to P.O. boxes.

Posti Parcel Connect – Zone 8
Bulgaria, Hungary, Portugal, Slovakia, Slovenia, Spain

Delivery time 4-9 business days. Order is delivered to your home or to nearest post office. Shipping company may contact you by phone or email. Orders are not delivered to P.O. boxes.

Posti Priority – Zone 1
Luxembourg

Delivery time 3-7 business days. Order is delivered to your home or to nearest post office. Shipping company may contact you by phone or email. Orders are not delivered to P.O. boxes.

Posti Priority – Zone 2
Croatia, Cyprus, France, Greece, Ireland, Italy, Malta, Monaco, Romania

Delivery time 3-8 business days. Order is delivered to your home or to nearest post office. Shipping company may contact you by phone or email. Orders are not delivered to P.O. boxes.

Posti Priority – Zone 3 and 4

Anguilla, Argentina, Armenia, Aruba, Australia, Bahamas, Bangladesh, Belize, Bermuda, Bosnia and Herzegovina, Brazil, Canada, Canary Islands, Chile, Costa Rica, Djibouti, Dominica, Egypt, El Salvador, Eritrea, Fiji, Grenada, Guam, Guyana, Iceland, Japan, Kenya, Liberia, Liechtenstein, Malaysia, Mexico, Monaco, Nepal, New Zealand, Norway, Pakistan, Papua New Guinea, Peru, Philippines, Puerto Rico, Russia, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Sierra Leone, Singapore, Switzerland, Tanzania, Thailand, Turkey, Uganda, United States, Venezuela

Delivery time 6-15 business days. Order is delivered to your home or collection point. Shipping company may contact you by phone or email. Orders are not delivered to P.O. boxes. Customer is responsible for customs clearance in country of delivery.

PostNord MyPack Collect - Zone A
Estonia, Latvia, Lithuania

Delivery time 2-7 business days. Order is delivered to your nearest pick-up point. Parcel arrival notification is sent by phone, email or in mobile application.

PostNord MyPack Collect - Zone B
Sweden

Delivery time 2-7 business days. Order is delivered to your nearest pick-up point. Parcel arrival notification is sent by phone, email or in mobile application.

PostNord MyPack Collect - Zone C
Denmark

Delivery time 2-7 business days. Order is delivered to your nearest pick-up point. Parcel arrival notification is sent by phone, email or in mobile application.

UPS Expedited - Zone 4

UPS Expedited - Zone 5

UPS Expedited - Zone 6

UPS Expedited - Zone 7

UPS Standard - Zone 1

UPS Standard - Zone 2

UPS Standard - Zone 3, 31 and 4

UPS Standard - Zone 5

UPS Standard - Zone Great Britain

UPS Standard - Zone Switzerland

2.3 Missing products or damaged package

Always check the contents of the package immediately upon delivery. If there are products missing or the package has been damaged, contact the shipping company and our customer service. If you do not inform us in time, you may lose your right to a refund or return the product.

2.4 Check product compatibility before ordering

Always check the compatibility of the product you are ordering with the product you are ordering it for. Information on compatibility can be found on the product page, or you can ask us directly at info@tradesoft.fi.

2.5 Force majeure and order restrictions

We are not responsible for the delivery being delayed or suspended due to a strike, natural disaster, confiscation, import or export restriction, or anything else that interferes with our business. We are also not responsible for packages that are refused, seized or denied entry by the customs agency or recipient.

Some shipping companies have restrictions for products, such as airsoft guns and gas. Therefore these products cannot be shipped with for example Posti (the Finnish postal service). Because of this we may not be able to ship all products to your country. You can check the available products by choosing your shipping country in the shopping cart – all available shipping methods will then be listed automatically.

3 Paying for your order

We offer various payment methods through our partners like the Finnish Paytrail, as well as Matkahuolto and Posti in the form of Cash On Delivery. In addition to these web shop payment methods, you can pay in cash or with your credit/debit card in our walk-in store in Turku, Finland. The available payment methods will automatically be listed in your shopping cart depending on the chosen shipping method and the shipping country.

Cash or Credit/Debit Card

Pay for the order when you pick it up at our store in Turku, Finland during opening hours.

Cash On Delivery (COD)

Pay for the order when you collect it at the pickup point of your choice (SmartPost) or at your nearest post office.

Credit card (Mastercard and Visa), Visa Electron, Mobile Pay, Finnish banks…

Choose your preferred payment method from various options. Payments are securely processed by the Finnish Paytrail.

Paypal

Use your Paypal account to pay for your order.


4 Warranty

All of our products are covered with a warranty of at least one month. The warranty period of each product is stated on the order receipt. The warranty covers normal use of the product and is void if the product is modified or disassembled. In addition, using an unmodified stock gun with a battery exceeding the nominal voltage or nominal capacity stated in the product description, also voids the warranty.

The warranty does not cover products like airsoft guns that have broken after being used in cold or damp climate. The products have originally been designed for warm climates and we cannot therefore guarantee that they function normally in sub-zero temperatures or in otherwise exceptional surroundings.

Remember that the product packaging and all contents including the order receipt are part of the product and needed for warranty processing. If you have lost your order receipt, you can easily print a new one in your account order history, or contact us with your customer details. If something is missing from the product or the product is not in good condition, we may have to compensate for the defect by lowering the total refund value.

If you think your product is broken always contact us before returning the product. Do not disassemble or try to repair the product yourself, as this may void the warranty. If there is not any defect in a product that has been returned to us for warranty processing, we may have to charge a warranty inspection fee and shipping costs.

New products are also covered by the six-month defect liability if the product lacks conformity. This means that if the product was defective at the time of the purchase we will repair or exchange the product within six months. This does not apply to products that have been disassembled, tuned or otherwise modified. In addition, products that have been misused or physically damaged are not covered by this guarantee.

5 Returning a product

All products must be returned in original condition, including product packaging and other accessories provided with the package. Pack the products carefully in the return parcel, so that they arrive in good condition. Only products that have not been used can be returned. However, you may try on for example clothes to make sure they fit.

NB! Products or services made to order to customers needs, like wires sold by the meter or Deans connector installation to battery, cannot be returned.

Remember to include the order receipt or order return form in the parcel. Mark the products you want to return and a short description of what you would like in exchange (different size, other product, refund). If you have lost the order receipt you can print a new one by logging in to your account on our website, or by printing out the order return form from the email you received with the title “Your order has been shipped”.

If you forget to include your contact information in the return package, contact us by email at info@tradesoft.fi. This helps us to identify your package and process the return as quickly as possible.

Always contact us by email at info@tradesoft.fi before returning a product.

FINLAND

All domestic orders can be returned for free within a month from receiving the package. Note that products must be returned with the same shipping company that you have chosen when placing your order. Matkahuolto Near parcels must also be returned from the same pickup point where you originally collected the order. Remember to always use our customer return number when sending the package – this way we will cover the shipping costs.

Matkahuolto parcels
Customer return number 9513946
Tradesoft Oy
Yliopistonkatu 6
20100 Turku

Posti parcels
Customer return number 632987
Tradesoft Oy
Yliopistonkatu 6
20100 Turku

The delivery time for Posti parcels is 1-7 business days. Matkahuolto is a bit quicker. The customer is responsible for paying the shipping costs for packages that have been returned without using our customer return number.

OTHER COUNTRIES

All orders outside of Finland can be returned within a month from receiving the package. The customer is responsible for all transportation fees and charges on any packages returned to Tradesoft. Eventual fees and charges to Tradesoft will be reduced from the value of the returned product before the refund is processed. Do not add Cash On Delivery (COD) or other extra services to the parcel, as these packages will be refused.

Make sure to use a postal service that insures you for the value of the products you are returning. Keep the receipt as proof of returning the products and send the tracking code to us by email at info@tradesoft.fi

Send your package to:
Tradesoft Oy
Yliopistonkatu 6
20100 Turku
Finland

5.1 Undeliverable package

FINLAND

If an order returns to us as undeliverable package, we will first contact the customer to arrange re-shipping. If the package returns to us a second time as undeliverable, we may charge the shipping costs for undelivered order. Customers that have chosen Cash On Delivery (COD) may lose their right to this payment method.

OTHER COUNTRIES

If an order returns to us as undeliverable package, we will charge the shipping costs by reducing the total shipping costs from the refund value of the order.

6 How to make changes to your order?

You may make changes to your order before it has been processed for shipping. Contact us immediately at info@tradesoft.fi and let us know how you would like to change the order. We will confirm the changes and then send you an updated order confirmation to your email. The order will be processed immediately when the outstanding balance has been paid.

6.1 Order cancellation

You may cancel your order before it has been processed for shipping. If you want to cancel your order, contact us immediately at info@tradesoft.fi.

7 Privacy policy

Every time a person creates an account or places an order in Tradesoft’s web shop, all information is saved in our customer database. This register’s main purpose is to ensure the smooth and efficient processing of orders and customer inquiries. This information is located on password protected and encrypted servers that are not accessible by outside parties. Upon a person’s request, the information may be used for marketing purposes, like newsletters, flyers or other forms of direct marketing.

If you wish to correct, update or remove any information about you that may be in our records, please send us e-mail at info@tradesoft.fi with the details of your request.

Cookies

Our website also uses cookies to enhance the customer experience. Cookies are used on most websites today, as they are able to collect information from your internet browsing, like which internet browser you are using or the IP address of your computer. Cookies do not record your username, password or other personal information. Our website has been designed to work with cookies, so if you decide to disable them, all content may not be shown and features will not function.

The original terms and conditions and other information on the website provided in Finnish and English also apply to any disputes that may arise when using the website with Google Translate translation tool.

Gift cards used in the shopping cart

The information you submit will be used to reply your support request. We will process your data in accordance with our Privacy Policy.