FI
EN
Compatible products
Check these out!
- You are here: Home »
GATE WARFET Version 1.1 Power Module
-31%
Warranty 24 mos.44,90 € 65,90 €
(incl. VAT 24%)
Select a model:
Shipping
Delivery on
Note! GATE has released a software update of WARFET, which improves the current pre-cocking feature in the unit. Thanks to the update the pre-cocking is done instantly after the shot, when originally it was programmed to function with a small delay. The upgraded version can be recognized from the "Ver. 1.1" sticker on the box.
There is an illustrative video of the upgrade below. Props to GATE!
With the WARFET you can win the fight before it even begins. That's where the name of the unit comes from.
WARFET is GATE's programmable MOSFET, which can also be used in "Plug 'n Play" mode. It is GATE's first MOSFET unit, which allows semi-only firing mode without any modifications to the cut-off lever. The units programmable features are i.a. rate of fire (ROF), pre-cocking, on/off smart fuse, LiPo protection and fire modes (semi-auto, 1-5 BB burst and full auto). In addition, the unit is compatible with microswitches. It also comes with Tamiya mini connector adapters.
WARFET can be installed in two ways:
- Simple (Plug n' Play): The unit is attached directly between the battery and the gun - some features are disabled
- Advanced installation: All features are enabled - in this case the unit also directs the power straight from the battery to the motor and protects the trigger contacts.
Functions:
- MOSFET
- 3rd generation MOSFET
- Microswitch compatibility (digital signal processing)
- ON/OFF active break
- Smart fuse
- Under Voltage Protection for different battery types
- Self-test
- Protective coating
- Programming
- Configurable firing modes
- Rate of fire control
- 1-5 shot burst fire
- Pre-cocking
- Smart trigger
- Dark mode
- Two installation methods:
Features:
- Voltage range for batteries 7.2V – 14.8V (absolute minimum and maximum 3V – 17V)
- Compatibility is excellent with powerful airsoft guns (i.a. DSG guns)
- Easy to install – you only need to install the signal wire and change the old connections with trigger contacts
- Full protection of the electric system (short circuits up to 1000 A)
- Very low power consumption in standby mode (0.2 mA)
- Very low resistance (2 mΩ)
- Deans and Tamiya mini connectors
The package includes:
- GATE WARFET unit
- Extra pair of Deans connectors
- Deans-Tamiya battery adapter
- Signal wire (60 cm)
- Dual signal wire (60 cm)
MOSFET (Metal Oxide Semiconductor Field Effect Transistor)
The unit reduces power loss due to normal mechanical contact in the trigger switch. When using MOSFET only the signal current flows through the trigger switch and the actual running current goes directly from the battery to the motor. This prevents the burning of the trigger contacts, which is going to happen sooner or later, especially when using powerful batteries - the average lifetime for contact surfaces in an actively used gun is around one year. At the same time, the MOSFET unit enables the maximum power flow in the circuit without unnecessary resistance due to worn trigger contacts. This also gives you a higher rate of fire and a faster trigger response.
NOTE! You will only get all of the MOSFET's features with the advanced installation.
More information on MOSFETs: Check out the MOSFET article in Tradetech to find out about the benefits etc. of the mysterious MOSFETs.
3rd generation MOSFET
The use of modern transistors and microprocessors has enabled the manufacture of small and reliable MOSFET units with microswitch compatibility.
With digital signal processing the MOSFET can filter out the vibrations of the microswitch during firing, which might cause excessive sparks and wear in the switch, lower rate of fire as well as heating of the motor, MOSFET, wires and battery, like with traditional MOSFETs. Since the MOSFET filters out the extra signal oscillation, there are no disadvantages of the vibrations created.
ON/OFF active brake
In operation, the motor and the gears accumulate kinetic energy (energy from motion). The magnitude of the energy is mainly determined by the speed of the mechanical parts. The maximum speed is reached approximately after the fourth shot. For this reason, the motor doesn't stop immediately after releasing the trigger, but continues to rotate for a moment. This is due to the accumulated kinetic energy; the more there is, the longer the motor keeps running "extra". The active brake is a feature, which stops the running parts with the motor immediately after releasing the trigger.
Benefits of ON/OFF active brake:
- No more double shots or double feeding. The gearbox performs only one full cycle with semi-auto. The piston always stays in the front position, which extends the lifespan of your gearbox.
- Realism - You get the exact amount of shots with every pull of the trigger as you meant. The advantage can especially be experienced with semi-auto builds.
- You can activate or deactivate the active brake according to your needs
NOTE! The active brake is only functional in the advanced installation.
You will find more information about how the active brake works by checking out our Tradetech MOSFET article.
Smart fuse
The smart fuse protects the MOSFET unit, the gearbox and the whole gun from electronic problems. The smart fuse is essentially an enhanced electronic fuse. The unit actively monitors the voltage, power and temperature, which ensures the fuse's reliability as well. The fuse protects your gun from both short circuits (SCP - Short Circuit Protection) and overloading (Overload Protection) as well as from overheating (OTP - Over Temperature Protection). Short circuit and overheating protection are important especially with LiPo batteries, because a short circuited LiPo battery might cause severe damage also to the gun.
Under Voltage Protection for different battery types (UVP)
Protects LiPo and Li-Ion batteries from excessive drainage. Adjustable for batteries of 7.4V - 14.8V voltages.
Self-test
The MOSFET has been equipped with a feature, with which the users themselves can test the condition of the unit. With this feature we can ensure that a problem with the gun is not caused by the MOSFET unit. With the self-test the user can also easily check if the active brake is on or off.
Protective coating
The transparent protective coating protects the MOSFET unit from splashes, debris and minor damages.
Programming
The WARFET has a programmable microprocessor. The settings are stored in memory also when the MOSFET is disconnected from the battery. Changing the settings of the unit is really easy and it's done with a WARFET programming card. The card is attached between the unit and the battery and the settings are automatically saved on the unit as they are changed.
Programmable features:
- Active brake (ON / OFF)
- Firing modes (semi-auto - full auto, semi-auto - burst, burst - full auto)
- Rate of fire (50 – 100%)
- Adjustment of burst fire (1-5 BBs)
- Pre-cocking
- Smart trigger (ON / OFF)
- Under voltage protection for 7.2V - 14.8V batteries
- Dark mode
Instructions for the programming can be found in the included guide and in GATE's manual.
Firing mode adjustment
With the unit you can change your firing mode from the traditional full auto - semi-auto mode to semi-auto - burst, as well as burst - full auto modes. The burst fire first and foremost saves your BBs and enables a more fun, realistic and tactical play style! In addition, the burst fire can be set so short that the gun fires one shot bursts, which basically means you have a semi-only mode at your disposal! So the gun can be programmed to shoot semi-auto fire in both selector switch positions, which makes it even easier to make a self-loading semi-automatic rifle, or DMR!
NOTE! The burst fire-full auto mode only works in the advanced installation.
Rate of fire adjustment
The adjustment is based on Pulse-Width Modulation, PWM and it enables the rate of fire adjustment between 50 – 100% (with 10% increments) regardless of the operating voltage. It does not take efficiency away from the gearbox's other features.
Adjustable burst
- First and foremost the burst fire saves your BBs
- If you release the trigger before the last shot, you can also shoot shorter bursts.
- The timing of the bursts can be adjusted (36 levels) - enables the firing of shorter and longer bursts. The manufacturer promises that at least 1-5 shot bursts are possible!
- The unit takes into account the drop in the voltage when the battery is draining so that it does not affect the amount of fired shots on burst.
- The timing can be adjusted so small that the gun only fires one shot per trigger pull - which makes it possible to remove full auto with just the help of the WARFET. Excellent choice for semi-auto DMR rifles (semi-only restricted guns). Also works in the "Plug n' Play" mode.
Pre-cocking
Thanks to pre-cocking your shots leave immediately without a "semi-delay" and you ensure your victory on the field! It also enables the so called "Closed bolt" action, which could significantly increase the gun's accuracy!
- The gearbox cocks the piston back after the last shot - the trigger response is therefore faster when the gearbox does not have to pull the piston back just before the shot.
- The level of pre-cocking can be adjusted, which means you can influence the length of the response and use the feature in different rates of fire.
- Either works automatically or trigger controlled - The automatic setting pre-cocks the piston after each semi-auto shot. When trigger controlled the user cocks the piston with the first pull of the trigger and fires with the other.
- NOTE! Pre-cocking does not work in burst/full auto modes - However it does allow using two different semi-auto modes. The other selector switch position shoots semi-auto fire with pre-cocking and in the other position it shoots one shot "bursts" without pre-cocking!
Smart trigger
Enables the fastest possible trigger response. Works in cooperation with ROF adjustment. After connecting the battery, with the first shot the system sets the ROF adjustment to 100%. With the next shot the rate changes to a preset (e.g. 50%). Thanks to this the first shot always fires as fast as possible and the following shots according to the preset speed. You'll get the best effect by using batteries, which have a high operating voltage, like 11.1V LiPo/Li-Ion batteries. Thus, you can achieve a very fast trigger response, but still maintain a moderate rate of fire.
Dark mode
The unit flashes a blue LED light during firing. It can be switched off for example for night activities, if it bothers the user. The LED helps with diagnosing possible problems.
Two installation methods
With the simple installation, you don't have to make modifications to the gun and the unit is directly connected between the gun and the battery. The unit can be directly connected to the Deans connectors or you can use the included adapter so that you can connect it with Tamiya mini connectors that are found in stock guns. Note, however, that the simple installation doesn't allow all possible features.
Available features:
- ROF adjustment
- Burst adjustment
- Firing modes adjustment (only semi-auto - full auto OR semi-auto - burst)
- Pre-cocking (only trigger controlled)
- Smart trigger
- Smart fuse
- Under voltage protection
- Dark mode
Following features are only available in the advanced installation:
- MOSFET - in the simple installation all current goes through the trigger switch, so the unit doesn't protect your trigger contacts.
- Active brake
- Fire mode adjustment (burst-full auto)
- Pre-cocking (automatic and trigger controlled)
Advanced installation requires you to solder the trigger switch wires again and install the signal wire, like other GATE's MOSFET units. This will allow you to use all the features and the unit also protects the trigger contacts from burning!
Note! WARFET is not compatible with Airsoft Systems ASCU, Black Talon Concepts (BTC) or similar units.
Gate
GATE Electronics is a Polish company which made its debut on the airsoft market in 2008. Their goal is to provide high-tech electronics for airsoft players worldwide. GATE’s product range consists of MOSFET circuits for all kinds of uses, whether you want a MOSFET which only works as a MOSFET or a MOSFET circuit where almost everything is programmable. The GATE products are easy to install and reliable in use. The products are thoroughly tested and the company listens closely to feedback from end users to uphold the quality of their products.
24-month warranty
GATE MOSFETs have an extended 24-month warranty. It covers manufacturing defects and problems that come up in normal use. The warranty does not cover any fault that is caused by a faulty installation or misuse, like one caused by too high a voltage. You have to use a separate fuse, which protects the MOSFET from short circuits especially with more powerful LiPo batteries, when using NanoASR, -AAB and PicoAAB MOSFETs or SSR series MOSFETs which do not have an electronic fuse. The use of a separate fuse in other MOSFETs is recommended. You will find installation instructions on GATE's website or in Tradetech.
Check the complete GATE collection here!
GATE
GATE Electronics is a Polish company which made its debut on the airsoft market in 2008. Their goal is to provide high-tech electronics for airsoft players worldwide. GATE’s product range consists of MOSFET circuits for all kinds of uses, whether you want a MOSFET which only works as a MOSFET or a MOSFET circuit where almost everything is programmable. The GATE products are easy to install and reliable in use. The products are thoroughly tested and the company listens closely to feedback from end users to uphold the quality of their products. Note! GATE has released a software update of WARFET, which improves the current pre-cocking feature in the unit. Thanks to the update the pre-cocking is done instantly after the shot, when originally it was programmed to function with a small delay. The upgraded version can be recognized from the "Ver. 1.1" sticker on the box.
There is an illustrative video of the upgrade below. Props to GATE!
With the WARFET you can win the fight before it even begins. That's where the name of the unit comes from.
WARFET is GATE's programmable MOSFET, which can also be used in "Plug 'n Play" mode. It is GATE's first MOSFET unit, which allows semi-only firing mode without any modifications to the cut-off lever. The units programmable features are i.a. rate of fire (ROF), pre-cocking, on/off smart fuse, LiPo protection and fire modes (semi-auto, 1-5 BB burst and full auto). In addition, the unit is compatible with microswitches. It also comes with Tamiya mini connector adapters.
WARFET can be installed in two ways:
- Simple (Plug n' Play): The unit is attached directly between the battery and the gun - some features are disabled
- Advanced installation: All features are enabled - in this case the unit also directs the power straight from the battery to the motor and protects the trigger contacts.
Functions:
- MOSFET
- 3rd generation MOSFET
- Microswitch compatibility (digital signal processing)
- ON/OFF active break
- Smart fuse
- Under Voltage Protection for different battery types
- Self-test
- Protective coating
- Programming
- Configurable firing modes
- Rate of fire control
- 1-5 shot burst fire
- Pre-cocking
- Smart trigger
- Dark mode
- Two installation methods:
Features:
- Voltage range for batteries 7.2V – 14.8V (absolute minimum and maximum 3V – 17V)
- Compatibility is excellent with powerful airsoft guns (i.a. DSG guns)
- Easy to install – you only need to install the signal wire and change the old connections with trigger contacts
- Full protection of the electric system (short circuits up to 1000 A)
- Very low power consumption in standby mode (0.2 mA)
- Very low resistance (2 mΩ)
- Deans and Tamiya mini connectors
The package includes:
- GATE WARFET unit
- Extra pair of Deans connectors
- Deans-Tamiya battery adapter
- Signal wire (60 cm)
- Dual signal wire (60 cm)
MOSFET (Metal Oxide Semiconductor Field Effect Transistor)
The unit reduces power loss due to normal mechanical contact in the trigger switch. When using MOSFET only the signal current flows through the trigger switch and the actual running current goes directly from the battery to the motor. This prevents the burning of the trigger contacts, which is going to happen sooner or later, especially when using powerful batteries - the average lifetime for contact surfaces in an actively used gun is around one year. At the same time, the MOSFET unit enables the maximum power flow in the circuit without unnecessary resistance due to worn trigger contacts. This also gives you a higher rate of fire and a faster trigger response.
NOTE! You will only get all of the MOSFET's features with the advanced installation.
More information on MOSFETs: Check out the MOSFET article in Tradetech to find out about the benefits etc. of the mysterious MOSFETs.
3rd generation MOSFET
The use of modern transistors and microprocessors has enabled the manufacture of small and reliable MOSFET units with microswitch compatibility.
With digital signal processing the MOSFET can filter out the vibrations of the microswitch during firing, which might cause excessive sparks and wear in the switch, lower rate of fire as well as heating of the motor, MOSFET, wires and battery, like with traditional MOSFETs. Since the MOSFET filters out the extra signal oscillation, there are no disadvantages of the vibrations created.
ON/OFF active brake
In operation, the motor and the gears accumulate kinetic energy (energy from motion). The magnitude of the energy is mainly determined by the speed of the mechanical parts. The maximum speed is reached approximately after the fourth shot. For this reason, the motor doesn't stop immediately after releasing the trigger, but continues to rotate for a moment. This is due to the accumulated kinetic energy; the more there is, the longer the motor keeps running "extra". The active brake is a feature, which stops the running parts with the motor immediately after releasing the trigger.
Benefits of ON/OFF active brake:
- No more double shots or double feeding. The gearbox performs only one full cycle with semi-auto. The piston always stays in the front position, which extends the lifespan of your gearbox.
- Realism - You get the exact amount of shots with every pull of the trigger as you meant. The advantage can especially be experienced with semi-auto builds.
- You can activate or deactivate the active brake according to your needs
NOTE! The active brake is only functional in the advanced installation.
You will find more information about how the active brake works by checking out our Tradetech MOSFET article.
Smart fuse
The smart fuse protects the MOSFET unit, the gearbox and the whole gun from electronic problems. The smart fuse is essentially an enhanced electronic fuse. The unit actively monitors the voltage, power and temperature, which ensures the fuse's reliability as well. The fuse protects your gun from both short circuits (SCP - Short Circuit Protection) and overloading (Overload Protection) as well as from overheating (OTP - Over Temperature Protection). Short circuit and overheating protection are important especially with LiPo batteries, because a short circuited LiPo battery might cause severe damage also to the gun.
Under Voltage Protection for different battery types (UVP)
Protects LiPo and Li-Ion batteries from excessive drainage. Adjustable for batteries of 7.4V - 14.8V voltages.
Self-test
The MOSFET has been equipped with a feature, with which the users themselves can test the condition of the unit. With this feature we can ensure that a problem with the gun is not caused by the MOSFET unit. With the self-test the user can also easily check if the active brake is on or off.
Protective coating
The transparent protective coating protects the MOSFET unit from splashes, debris and minor damages.
Programming
The WARFET has a programmable microprocessor. The settings are stored in memory also when the MOSFET is disconnected from the battery. Changing the settings of the unit is really easy and it's done with a WARFET programming card. The card is attached between the unit and the battery and the settings are automatically saved on the unit as they are changed.
Programmable features:
- Active brake (ON / OFF)
- Firing modes (semi-auto - full auto, semi-auto - burst, burst - full auto)
- Rate of fire (50 – 100%)
- Adjustment of burst fire (1-5 BBs)
- Pre-cocking
- Smart trigger (ON / OFF)
- Under voltage protection for 7.2V - 14.8V batteries
- Dark mode
Instructions for the programming can be found in the included guide and in GATE's manual.
Firing mode adjustment
With the unit you can change your firing mode from the traditional full auto - semi-auto mode to semi-auto - burst, as well as burst - full auto modes. The burst fire first and foremost saves your BBs and enables a more fun, realistic and tactical play style! In addition, the burst fire can be set so short that the gun fires one shot bursts, which basically means you have a semi-only mode at your disposal! So the gun can be programmed to shoot semi-auto fire in both selector switch positions, which makes it even easier to make a self-loading semi-automatic rifle, or DMR!
NOTE! The burst fire-full auto mode only works in the advanced installation.
Rate of fire adjustment
The adjustment is based on Pulse-Width Modulation, PWM and it enables the rate of fire adjustment between 50 – 100% (with 10% increments) regardless of the operating voltage. It does not take efficiency away from the gearbox's other features.
Adjustable burst
- First and foremost the burst fire saves your BBs
- If you release the trigger before the last shot, you can also shoot shorter bursts.
- The timing of the bursts can be adjusted (36 levels) - enables the firing of shorter and longer bursts. The manufacturer promises that at least 1-5 shot bursts are possible!
- The unit takes into account the drop in the voltage when the battery is draining so that it does not affect the amount of fired shots on burst.
- The timing can be adjusted so small that the gun only fires one shot per trigger pull - which makes it possible to remove full auto with just the help of the WARFET. Excellent choice for semi-auto DMR rifles (semi-only restricted guns). Also works in the "Plug n' Play" mode.
Pre-cocking
Thanks to pre-cocking your shots leave immediately without a "semi-delay" and you ensure your victory on the field! It also enables the so called "Closed bolt" action, which could significantly increase the gun's accuracy!
- The gearbox cocks the piston back after the last shot - the trigger response is therefore faster when the gearbox does not have to pull the piston back just before the shot.
- The level of pre-cocking can be adjusted, which means you can influence the length of the response and use the feature in different rates of fire.
- Either works automatically or trigger controlled - The automatic setting pre-cocks the piston after each semi-auto shot. When trigger controlled the user cocks the piston with the first pull of the trigger and fires with the other.
- NOTE! Pre-cocking does not work in burst/full auto modes - However it does allow using two different semi-auto modes. The other selector switch position shoots semi-auto fire with pre-cocking and in the other position it shoots one shot "bursts" without pre-cocking!
Smart trigger
Enables the fastest possible trigger response. Works in cooperation with ROF adjustment. After connecting the battery, with the first shot the system sets the ROF adjustment to 100%. With the next shot the rate changes to a preset (e.g. 50%). Thanks to this the first shot always fires as fast as possible and the following shots according to the preset speed. You'll get the best effect by using batteries, which have a high operating voltage, like 11.1V LiPo/Li-Ion batteries. Thus, you can achieve a very fast trigger response, but still maintain a moderate rate of fire.
Dark mode
The unit flashes a blue LED light during firing. It can be switched off for example for night activities, if it bothers the user. The LED helps with diagnosing possible problems.
Two installation methods
With the simple installation, you don't have to make modifications to the gun and the unit is directly connected between the gun and the battery. The unit can be directly connected to the Deans connectors or you can use the included adapter so that you can connect it with Tamiya mini connectors that are found in stock guns. Note, however, that the simple installation doesn't allow all possible features.
Available features:
- ROF adjustment
- Burst adjustment
- Firing modes adjustment (only semi-auto - full auto OR semi-auto - burst)
- Pre-cocking (only trigger controlled)
- Smart trigger
- Smart fuse
- Under voltage protection
- Dark mode
Following features are only available in the advanced installation:
- MOSFET - in the simple installation all current goes through the trigger switch, so the unit doesn't protect your trigger contacts.
- Active brake
- Fire mode adjustment (burst-full auto)
- Pre-cocking (automatic and trigger controlled)
Advanced installation requires you to solder the trigger switch wires again and install the signal wire, like other GATE's MOSFET units. This will allow you to use all the features and the unit also protects the trigger contacts from burning!
Note! WARFET is not compatible with Airsoft Systems ASCU, Black Talon Concepts (BTC) or similar units.
Gate
GATE Electronics is a Polish company which made its debut on the airsoft market in 2008. Their goal is to provide high-tech electronics for airsoft players worldwide. GATE’s product range consists of MOSFET circuits for all kinds of uses, whether you want a MOSFET which only works as a MOSFET or a MOSFET circuit where almost everything is programmable. The GATE products are easy to install and reliable in use. The products are thoroughly tested and the company listens closely to feedback from end users to uphold the quality of their products.
24-month warranty
GATE MOSFETs have an extended 24-month warranty. It covers manufacturing defects and problems that come up in normal use. The warranty does not cover any fault that is caused by a faulty installation or misuse, like one caused by too high a voltage. You have to use a separate fuse, which protects the MOSFET from short circuits especially with more powerful LiPo batteries, when using NanoASR, -AAB and PicoAAB MOSFETs or SSR series MOSFETs which do not have an electronic fuse. The use of a separate fuse in other MOSFETs is recommended. You will find installation instructions on GATE's website or in Tradetech.
Check the complete GATE collection here!
Ask about product: GATE WARFET Version 1.1 Power Module
Compatible products
Check these out!
GATE TITAN™ II V2 Bluetooth™ Expert Drop-In MOSFET/Microcontroller Unit (Rear Wired)
GATE TITAN™ II V2 Bluetooth™ Expert Drop-In MOSFET/Microcontroller Unit (Front Wired)
GATE ASTER™ V2 SE Expert Drop-In MOSFET/Microcontroller Unit with Quantum Trigger (Front Wired)
GATE ASTER™ V2 SE Expert Drop-In MOSFET/Microcontroller Unit with Quantum Trigger (Rear Wired)
Other information
Contact us
Tradesoft Oy
Yliopistonkatu 6
20100 Turku
+358 44 34 29 421
info@tradesoft.fi
en.tradesoft.fi
2560587-4
Opening hours
Yliopistonkatu 6, 20100 Turku, Finland
- Monday 14-18
- Tuesday closed
- Wednesday 14-18
- Thursday closed
- Friday 14-18
- Saturday 10-15
- Sunday closed
Exceptional opening hours
- 1.5. Labour Day (wednesday) closed
- 21.6. Midsummer (friday) closed
- 22.6. Midsummer (saturday) closed
Terms and conditions
Last updated: 8.8.2023
These terms and conditions only apply to end users as such. Contact us by email regarding B2B terms.
1 Prices
Tradesoft Oy (Business ID 2560587-4) sells products within Finland and the EU, as well as to many non-EU countries. All of the prices in our web shop include Finnish VAT (24 %). The currency is euro (€). We reserve the right to price changes.
Finland and other EU countries
The total of the order can be seen in the shopping cart after the correct shipping and payment method have been chosen. No further costs will be charged by Tradesoft.
Non-EU Countries
Some areas that belong to EU countries (see list) are excluded from EU VAT policy, and will be treated as countries outside the European Union. Orders shipped to non-EU countries will be sent out VAT free. However, you are still responsible for paying the customs duty and VAT in your own country before receiving the order.
2 Shipping and delivery
We use Matkahuolto and Posti, the Finnish postal service, for shipping domestic orders. International orders are shipped with GLS, Posti, Postnord and UPS. The available shipping methods will automatically be listed in your shopping cart depending on the products and the shipping country.
We currently ship within Finland (incl. Åland Islands) and to the following countries:
European Union
Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden
Non-EU countries
Anguilla, Argentina, Armenia, Aruba, Australia, Bahamas, Bangladesh, Belize, Bermuda, Bosnia and Herzegovina, Brazil, Canada, Canary Islands, Chile, Costa Rica, Djibouti, Dominica, Egypt, El Salvador, Eritrea, Fiji, Grenada, Guam, Guyana, Iceland, Japan, Kenya, Liberia, Liechtenstein, Malaysia, Mexico, Monaco, Nepal, New Zealand, Norway, Pakistan, Papua New Guinea, Peru, Philippines, Puerto Rico, Russia, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Sierra Leone, Singapore, Switzerland, Tanzania, Thailand, Turkey, Uganda, United States, Venezuela
Customer is responsible for customs clearance in country of delivery. In addition, customer must ensure that none of the goods are prohibited or require special handling in country of delivery.
2.1 Delivery time and tracking
All orders placed before 1 pm (Eastern European Time) will be shipped on the same or following business day. The estimated delivery time can be seen on the product page and in your shopping cart after choosing the correct shipping country. If the order contains for example installation services the delivery time may be postponed. If a product is out of stock, we will contact the customer with an updated estimation of the delivery time.
You can track your order by logging in to your account, or by going to the following tracking site. You need your order number and the email address that was given when placing the order to track your order.
2.2 Shipping methods and costs
The available shipping methods are updated automatically when you choose your shipping country. The total shipping costs depend on the products and the total value of your shopping cart. Some shipping methods also qualify for free shipping after a certain total cart value has been reached.
See the available shipping methods below based on country.
FINLAND
In-Store Pickup, Turku
Order can be picked up at our store in Turku, Finland during opening hours.
Matkahuolto Near Parcel (incl. Parcel Point)
Delivery time 1-3 business days. Order can be picked up in Matkahuolto or at the following locations: Matkahuolto Parcel Point, K-market, R-kioski. Parcel point orders exceeding 1 parcel or 30 kg will be sent to a Matkahuolto terminal.
Matkahuolto Home Delivery (ADR service)
Delivery time 1-3 business days. Order contains ADR products and it is delivered to your home on weekdays at the time that has been agreed on with you. ADR handling fee for dangerous goods is included in shipping costs.
Matkahuolto Home Delivery
Delivery time 1-3 business days. Order is delivered to your home on weekdays at the time that has been agreed on with you. You may also request the parcel to be delivered to your door without signature confirmation.
Posti Letter
Delivery time 1-4 business days. Order is delivered to your home as basic letter (2nd class). If the letter will not fit through the letter hole the order will be taken to your nearest post office. You will then receive notice of arrival. No tracking available.
Posti Small Parcel
Delivery time 1-4 business days. Order is delivered to your home. If the parcel will not fit through the letter hole the order will be taken to your nearest post office. You will then receive notice of arrival.
Posti Domestic Parcel and SmartPost Parcel Point
Delivery time 1-4 business days. Order is picked up at post office or SmartPost Parcel Point. You receive a text message for SmartPost orders with a code to pick up the order. Remember to take a credit/debit card with you, if you chose Cash on Delivery.
Posti Domestic Parcel to Military Garrison (READ details!)
Delivery time 1-4 business days. Order is sent to military garrison and delivered to you according to its mode of operation. Enter your military garrison, unit and rank as the company name and include the garrison's address in respective fields.
OTHER COUNTRIES
Posti PickUp Parcel, Sweden
Sweden
Delivery time 3-6 business days. Order is delivered to a pick-up or parcel point. Shipping company may contact you by phone or email. Orders are not delivered to P.O. boxes.
Posti PickUp Parcel, Denmark
Denmark
Delivery time 3-5 business days. Order is delivered to a pick-up or parcel point. Shipping company may contact you by phone or email. Orders are not delivered to P.O. boxes.
Posti Baltic Parcel (Itella)
Estonia, Latvia, Lithuania
Delivery time 2-4 business days. Order is delivered to Itella SmartPost parcel point, nearest post office, or to your home. Shipping company may contact you by phone or email. Orders are not delivered to P.O. boxes.
GLS – Zone A
Denmark, Estonia, Latvia, Lithuania, Sweden
Delivery time 1-4 business days. Order is delivered to your home or to nearest pick-up point. Shipping company may contact you by phone.
GLS – Zone B
Austria, Belgium, Czech Republic, Germany, Italy, the Netherlands, Poland, San Marino, Vatican City State
Delivery time 3-5 business days. Order is delivered to your home or to nearest pick-up point. Shipping company may contact you by phone.
GLS – Zone C
France, Luxembourg, Monaco
Delivery time 3-5 business days. Order is delivered to your home or to nearest pick-up point. Shipping company may contact you by phone.
GLS – Zone D
Ireland, Slovakia
Delivery time 3-7 business days. Order is delivered to your home or to nearest pick-up point. Shipping company may contact you by phone.
GLS – Zone E
Bulgaria, Croatia, Hungary, Portugal, Romania, Slovenia, Spain
Delivery time 3-7 business days. Order is delivered to your home or to nearest pick-up point. Shipping company may contact you by phone.
GLS – Zone F
Greece, Malta
Delivery time 5-8 business days. Order is delivered to your home or to nearest pick-up point. Shipping company may contact you by phone.
GLS – Zone G
Norway, United Kingdom
Delivery time 3-8 business days. Order is delivered to your home or to nearest pick-up point. Shipping company may contact you by phone.
GLS – Zone H
Liechtenstein, Switzerland
Delivery time 4-5 business days. Order is delivered to your home or to nearest pick-up point. Shipping company may contact you by phone.
Posti Parcel Connect – Zone 3
Germany
Delivery time 2-5 business days. Order is delivered to your home or to nearest post office. Shipping company may contact you by phone or email. Orders are not delivered to P.O. boxes.
Posti Parcel Connect – Zone 7
Austria, Belgium, Czech Republic, the Netherlands, Poland
Delivery time 4-6 business days. Order is delivered to your home or to nearest post office. Shipping company may contact you by phone or email. Orders are not delivered to P.O. boxes.
Posti Parcel Connect – Zone 8
Bulgaria, Hungary, Portugal, Slovakia, Slovenia, Spain
Delivery time 4-9 business days. Order is delivered to your home or to nearest post office. Shipping company may contact you by phone or email. Orders are not delivered to P.O. boxes.
Posti Priority – Zone 1
Luxembourg
Delivery time 3-7 business days. Order is delivered to your home or to nearest post office. Shipping company may contact you by phone or email. Orders are not delivered to P.O. boxes.
Posti Priority – Zone 2
Croatia, Cyprus, France, Greece, Ireland, Italy, Malta, Monaco, Romania
Delivery time 3-8 business days. Order is delivered to your home or to nearest post office. Shipping company may contact you by phone or email. Orders are not delivered to P.O. boxes.
Posti Priority – Zone 3 and 4
Anguilla, Argentina, Armenia, Aruba, Australia, Bahamas, Bangladesh, Belize, Bermuda, Bosnia and Herzegovina, Brazil, Canada, Canary Islands, Chile, Costa Rica, Djibouti, Dominica, Egypt, El Salvador, Eritrea, Fiji, Grenada, Guam, Guyana, Iceland, Japan, Kenya, Liberia, Liechtenstein, Malaysia, Mexico, Monaco, Nepal, New Zealand, Norway, Pakistan, Papua New Guinea, Peru, Philippines, Puerto Rico, Russia, Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Sierra Leone, Singapore, Switzerland, Tanzania, Thailand, Turkey, Uganda, United States, Venezuela
Delivery time 6-15 business days. Order is delivered to your home or collection point. Shipping company may contact you by phone or email. Orders are not delivered to P.O. boxes. Customer is responsible for customs clearance in country of delivery.
PostNord MyPack Collect - Zone A
Estonia, Latvia, Lithuania
Delivery time 2-7 business days. Order is delivered to your nearest pick-up point. Parcel arrival notification is sent by phone, email or in mobile application.
PostNord MyPack Collect - Zone B
Sweden
Delivery time 2-7 business days. Order is delivered to your nearest pick-up point. Parcel arrival notification is sent by phone, email or in mobile application.
PostNord MyPack Collect - Zone C
Denmark
Delivery time 2-7 business days. Order is delivered to your nearest pick-up point. Parcel arrival notification is sent by phone, email or in mobile application.
UPS Expedited - Zone 4
UPS Expedited - Zone 5
UPS Expedited - Zone 6
UPS Expedited - Zone 7
UPS Standard - Zone 1
UPS Standard - Zone 2
UPS Standard - Zone 3, 31 and 4
UPS Standard - Zone 5
UPS Standard - Zone Great Britain
UPS Standard - Zone Switzerland
2.3 Missing products or damaged package
Always check the contents of the package immediately upon delivery. If there are products missing or the package has been damaged, contact the shipping company and our customer service. If you do not inform us in time, you may lose your right to a refund or return the product.
2.4 Check product compatibility before ordering
Always check the compatibility of the product you are ordering with the product you are ordering it for. Information on compatibility can be found on the product page, or you can ask us directly at info@tradesoft.fi.
2.5 Force majeure and order restrictions
We are not responsible for the delivery being delayed or suspended due to a strike, natural disaster, confiscation, import or export restriction, or anything else that interferes with our business. We are also not responsible for packages that are refused, seized or denied entry by the customs agency or recipient.
Some shipping companies have restrictions for products, such as airsoft guns and gas. Therefore these products cannot be shipped with for example Posti (the Finnish postal service). Because of this we may not be able to ship all products to your country. You can check the available products by choosing your shipping country in the shopping cart – all available shipping methods will then be listed automatically.
3 Paying for your order
We offer various payment methods through our partners like the Finnish Paytrail, as well as Matkahuolto and Posti in the form of Cash On Delivery. In addition to these web shop payment methods, you can pay in cash or with your credit/debit card in our walk-in store in Turku, Finland. The available payment methods will automatically be listed in your shopping cart depending on the chosen shipping method and the shipping country.
Cash or Credit/Debit Card
Pay for the order when you pick it up at our store in Turku, Finland during opening hours.
Cash On Delivery (COD)
Pay for the order when you collect it at the pickup point of your choice (SmartPost) or at your nearest post office.
Credit card (Mastercard and Visa), Visa Electron, Mobile Pay, Finnish banks…
Choose your preferred payment method from various options. Payments are securely processed by the Finnish Paytrail.
Paypal
Use your Paypal account to pay for your order.
4 Warranty
All of our products are covered with a warranty of at least one month. The warranty period of each product is stated on the order receipt. The warranty covers normal use of the product and is void if the product is modified or disassembled. In addition, using an unmodified stock gun with a battery exceeding the nominal voltage or nominal capacity stated in the product description, also voids the warranty.
The warranty does not cover products like airsoft guns that have broken after being used in cold or damp climate. The products have originally been designed for warm climates and we cannot therefore guarantee that they function normally in sub-zero temperatures or in otherwise exceptional surroundings.
Remember that the product packaging and all contents including the order receipt are part of the product and needed for warranty processing. If you have lost your order receipt, you can easily print a new one in your account order history, or contact us with your customer details. If something is missing from the product or the product is not in good condition, we may have to compensate for the defect by lowering the total refund value.
If you think your product is broken always contact us before returning the product. Do not disassemble or try to repair the product yourself, as this may void the warranty. If there is not any defect in a product that has been returned to us for warranty processing, we may have to charge a warranty inspection fee and shipping costs.
New products are also covered by the six-month defect liability if the product lacks conformity. This means that if the product was defective at the time of the purchase we will repair or exchange the product within six months. This does not apply to products that have been disassembled, tuned or otherwise modified. In addition, products that have been misused or physically damaged are not covered by this guarantee.
5 Returning a product
All products must be returned in original condition, including product packaging and other accessories provided with the package. Pack the products carefully in the return parcel, so that they arrive in good condition. Only products that have not been used can be returned. However, you may try on for example clothes to make sure they fit.
NB! Products or services made to order to customers needs, like wires sold by the meter or Deans connector installation to battery, cannot be returned.
Remember to include the order receipt or order return form in the parcel. Mark the products you want to return and a short description of what you would like in exchange (different size, other product, refund). If you have lost the order receipt you can print a new one by logging in to your account on our website, or by printing out the order return form from the email you received with the title “Your order has been shipped”.
If you forget to include your contact information in the return package, contact us by email at info@tradesoft.fi. This helps us to identify your package and process the return as quickly as possible.
Always contact us by email at info@tradesoft.fi before returning a product.
FINLAND
All domestic orders can be returned for free within a month from receiving the package. Note that products must be returned with the same shipping company that you have chosen when placing your order. Matkahuolto Near parcels must also be returned from the same pickup point where you originally collected the order. Remember to always use our customer return number when sending the package – this way we will cover the shipping costs.
Matkahuolto parcels
Customer return number 9513946
Tradesoft Oy
Yliopistonkatu 6
20100 Turku
Posti parcels
Customer return number 632987
Tradesoft Oy
Yliopistonkatu 6
20100 Turku
The delivery time for Posti parcels is 1-7 business days. Matkahuolto is a bit quicker. The customer is responsible for paying the shipping costs for packages that have been returned without using our customer return number.
OTHER COUNTRIES
All orders outside of Finland can be returned within a month from receiving the package. The customer is responsible for all transportation fees and charges on any packages returned to Tradesoft. Eventual fees and charges to Tradesoft will be reduced from the value of the returned product before the refund is processed. Do not add Cash On Delivery (COD) or other extra services to the parcel, as these packages will be refused.
Make sure to use a postal service that insures you for the value of the products you are returning. Keep the receipt as proof of returning the products and send the tracking code to us by email at info@tradesoft.fi
Send your package to:
Tradesoft Oy
Yliopistonkatu 6
20100 Turku
Finland
5.1 Undeliverable package
FINLAND
If an order returns to us as undeliverable package, we will first contact the customer to arrange re-shipping. If the package returns to us a second time as undeliverable, we may charge the shipping costs for undelivered order. Customers that have chosen Cash On Delivery (COD) may lose their right to this payment method.
OTHER COUNTRIES
If an order returns to us as undeliverable package, we will charge the shipping costs by reducing the total shipping costs from the refund value of the order.
6 How to make changes to your order?
You may make changes to your order before it has been processed for shipping. Contact us immediately at info@tradesoft.fi and let us know how you would like to change the order. We will confirm the changes and then send you an updated order confirmation to your email. The order will be processed immediately when the outstanding balance has been paid.
6.1 Order cancellation
You may cancel your order before it has been processed for shipping. If you want to cancel your order, contact us immediately at info@tradesoft.fi.
7 Privacy policy
Every time a person creates an account or places an order in Tradesoft’s web shop, all information is saved in our customer database. This register’s main purpose is to ensure the smooth and efficient processing of orders and customer inquiries. This information is located on password protected and encrypted servers that are not accessible by outside parties. Upon a person’s request, the information may be used for marketing purposes, like newsletters, flyers or other forms of direct marketing.
If you wish to correct, update or remove any information about you that may be in our records, please send us e-mail at info@tradesoft.fi with the details of your request.
Cookies
Our website also uses cookies to enhance the customer experience. Cookies are used on most websites today, as they are able to collect information from your internet browsing, like which internet browser you are using or the IP address of your computer. Cookies do not record your username, password or other personal information. Our website has been designed to work with cookies, so if you decide to disable them, all content may not be shown and features will not function.
The original terms and conditions and other information on the website provided in Finnish and English also apply to any disputes that may arise when using the website with Google Translate translation tool.